This Pull Off Tester is consists of Electronic Controller, Upper Platen, Load cell and Loading Screw Jack with Mechanical Drive

1. Electronic Controller: Electronic Controller is used to support the Upper Platen & Loading Screw Jack. It consist of Load Indicator to indicate current during testing as well as hold Maximum Load, Load/Unload Switches and potentiometer for speed setting. While the Load is Overloaded then Pull Off Tester displays Overload Signal  & Buzzer gets ON.
2. Upper Platen:
   Upper Platen is mounted on two Guide Rods. The Height of the Platen is Adjustable. Load Cell is fixed on the Platen.
   Load Cell: Load cell with Maximum capacity up to 5 Tons measures the applied Load. 
3. Loading Screw Jack: Loading Screw Jack is used to Load as well as to Unload the Sample. It can be moved in Upward & Downward Direction.

Specification:

Load Cell Capacity	0 to 50 KN
Drive	Ac Motor 3 Phase, 415V AC with VFD.
Rate of Loading (Motor Speed)	10 to 100 mm / min
Horizontal Clearance	500 mm
Vertical Clearance	100 mm
Max. Platen Travel	100 mm
Power Supply	415V AC, 3 Phase
Output Supply	230V AC
Size	1200 (H)  x  500 (W)  x  400 (D) Nominal