For Accurate Objective and Fast dry air leak testing

Kalpak Micro Leak Tester MELD-3000 is differential pressure based Leak testing system used for accurate and fast detection of leak in the component. The differential pressure measurement system detects the leak by measuring the difference between the pressure of test component and the master component. This very accurate leak measurement system completely avoids the age-old method of water dipping thus avoiding its drawbacks such as operator dependency and wetting of the component. It is easy to operate, yet feature rich to meet any complex leak testing requirements.

The Major Features and Benefits of these instruments are:

Fully programmable test pressure limits, allowable leak rate, test cycle times to suit individual application.

Short testing time.

Low investment and running cost.

Objective and quantified statement of quality with GO-NO GO results.

Sufficient accuracy.

User friendly and fully automatic machine with/ without pneumatic/ hydraulic fixtures can be provided.

The major applications of the instrument is in the field of

Automotive	Air Brake Circuit, Ball Valve Casing, Bellows Seal, Brake Accumulator, Brake Circuit, Brake fluid reservoir, Brake master cylinder, Camshaft Cover, Castings, Clutch Master, Clutch Housing, Cylinder Block, Differential, Engine Block, Engine Combustion Chamber, Engine Cover, Exhaust Manifold, Exhaust Pipe, Fuel float, Fuel injector, Fuel Nozzle, Gear Box Housing, Heater Core, High and Low Pressure fuel Circuit, Injection fuel circuit, Intake manifold, Intake Valve, Manual Transmission, Muffler Oil Circuit, Oil Heater, Oil Manifold, Piston, Power Steering Reservoir, Pump Housing, Silencer, Shock Absorber, Hydraulic, Spiral wound gaskets for camshaft, Camshaft, Cylinder Head, Engine, Steering Box( Hydraulic), Supercharger, Tank Fluid Circuit, Throttle Body, Transfer Case, Turbo Compressor, Washer Fluid reservoir.
Automotive Components	Air Filter, Battery, Carburetor, Catalytic Converter, Diesel Filter, Diesel Injector, Flow Control Valve, Fuel Cap, Fuel Filter, Fuel Gauge, Fuel Pump, Fuel Tank, Gas tank, Gear Box, Heat Exchange, Horn, Hydraulic Pump, Oil Cooler, Oil Filter, Oil Gauge, Oil Pressure Switch, Oil Pump, Power Steering Pump, Pressure Relief Valve, Pneumatic Spring, Radiator, Rubber Hose, Shock Absorber, Spark Plug, Tank, Fuse Box, Fuel Circuit, Thermostat, Vacuum Solenoid, Water Fluid Pump, Water Pump
Engineering	Valves, Seated Assemblies, Pumps, Hydraulic Systems, Refrigerant Systems, Castings, Heat Exchangers, Radiators, Aerosol Cans
Food and Pharmaceuticals	Packing Tins, Bottles, Plastic Jars, Cookers, Boilers, Vacuum Flasks, Aerosol Cans, Containers
Medical	Containers, Catheters, Anesthetic and IV systems, Filters
Defense and Aerospace	Fuel Tanks, Valve Assemblies, Wave Guides

Optional features

Process counter and statistical calculations.

Remote computer controlled programming and execution.

Statistical process control software for use on PC.

Bi- directional Interface to communicate with other devices

Interface with machine control and highways.

Customized Manual/ Pneumatic or hydraulic Clamping/Sealing Test fixtures.

Specifications:

Model	MELD-3000
Technology	Differential Pressure
Test Pressure	-1 Bar to 20 Bar
Leak Measurement	0.1 mm WC and above.
Accuracy	1: 10000 parts

Customization
We can develop complete turnkey leak test solutions for your applications using our engineering expertise in application of leak detection techniques, Design of Electrical and Electronics circuitry, Pneumatic and Hydraulic Clamping/ Sealing Fixtures/ PLC based programmable loading and Unloading Systems
Kalpak Leak Software
Kalpak Leak software is a powerful Windows Based user friendly Software. The test Data is acquired through the serial PC Port and logged on to provide Tabular display. The table indicates details like Product Code, Customer Code number, Test Timings set for Fill, Settle, test and Exhaust cycles. Exhaust, Delay Set and Group Set. The data table also provides details such as Test Date and Time, Set test Pressure, Set Pressure difference, Actual Leak as well as Accept/Reject Status.
Features of Kalpak Software
User friendly, Easy to Load and Easy to Operate. No Special Training required. User friendly Screen with complete evaluation and presentation of test results in Tabular formats. Online/Receive Options. Report Screen for Data entry and to generate reports. Layout design of Parameters, results can be preprogrammed as per user requirements Easy Access to results of past data

For Accurate Objective and Fast dry air leak testing

Kalpak Micro Leak tester MELD-3000 Differential Pressure Based